CS series desander is the second class solids control equipment of drilling-fluid solid control system. The design of desander cyclones are based on the centrifuge-setting principle of particles. The separating drilling fluid goes into the cyclone along its inner-wall at a certain pressure and speed made by the pump. The great particles are going down spirally along the inner-wall of the cyclone at the centrifugal force and the gravity , then running out through the underset nozzle and falling down on the close-mush shale shaker for further separation . The other fluid goes up along the centre of the cyclone spirally, and goes into the second class separating equipment desilter for further separating. hlmudcleaning(at)hotmail(dot)com CS series Desander Technical Parameters Model CS250×2 CS 250×2 Screen area 1.0m2(600×1600mm) No Under fluids Shaker Capacity =1056GPM =1056GPM Cone size 10" (250mm) Cone number 1-2 Ea Cones, Specify cones No. when ordering Pressure 0.21~0.4Mpa Matching pump SB8x6-13(55kw) Inlet Size 100-150mm 100-150mm Outlet Size 150-200mm 150-200mm Separation size 47-56µm
Can i help you?
In this category?
|Business Type:||Cleaning Equipment|
|Company :||HL mud cleaning equipment CoLtd|
|Address :||No.11 weiyang Road|