Surface treatment : hot dip galvanized Zinc thickness: 86μm Technology: press ,cut ,drop forged Load : 70kn/120kn/160kn Voltage : 11kv/33kv Life time: more than 30years Used on : overhead line Color: Silver advantage: good price with high quality Experience: More than 12years. Used with: ball eye ,ball socket , tension clamp, U bolt Export to : Allover the world Certificate : ISO9001, SGS
electric power fitting Dimensions: The dimensions on the drawings are the final dimensions after the hot dip galvanization. The design of the fittings is indicative; however the mentioned dimensions on the drawings are the critical ones. electric power fitting GALVANIZATION The fittings shall be delivered hot dip galvanized according to the following specifications: • The Zinc of the electric power fitting that shall be used shall have the quality of minimum category prime western according to the category Zn 98.5 according to ISO-1461. • Then washed out with water and then flux treated and dried out. • The hot dip galvanization shall be made in a Zinc bath of temperature 450°C and of Zn-composition min. 98,5%. • The galvanization thickness of the electric power fitting shall be in average 80m thick! On an isolated piece or on a small part of the surface the thickness can be a little lower, however on all pieces and on all surfaces the minimum thickness shall be 78μm and the average weight in relation to the galvanized area shall be 610 gr/m2.
Can i help you?
In this category?
|Business Type:||Power Cable Accessories|
|Company :||Tele power coLtd|