Coal mill pulverizer

Product Description

Raw coal is fed through a central coal inlet at the top of the pulverizer and falls by gravity to the rotating grinding table, mixing with classifier rejects returned for re-grinding. Centrifugal action forces the coal outward to the grinding ring where it is pulverized between the ring and three grinding rollers. Grinding load, transmitted from the tension rods through the loading frame to the roller assemblies, holds the rollers in contact with the grinding ring. The rollers adjust vertically as the depth of the coal load increases or decreases. A nozzle ring on the outside perimeter of the grinding ring feeds primary air to the pulverizer. Pyrites and tramp metal fall through the nozzle ring openings to be scraped into a rejects hopper. A stream of low-velocity air carries the particles of pulverized coal upward where they enter the classifier inlet vanes. Fine particles travel to the burners in the primary air stream, but the larger, heavier particles are returned to the grinding zone for further

Loading ..