| Model NO.: | Sine wave power inverter pg-lcd55854 |
|---|
| Customization: | Available Customized Request |
|---|
- - - - MODEL | | PG 500 | PG 1000 | PG2000 | CAPACITY | VA/W | 500VA / 300W | 1000VA/600W | 2000VA/1200W | INPUT | Phase | Single | | Voltage | 110 / 120VAC or 220 / 230 / 240VAC | | VoltageRange | 90 - 145VAC or 170-280VAC ( Narrow Range ) | | | 50-145VAC / 90-280VAC ( Wide Range ) | OUTPUT | Phase | Single | | Voltage | 120VAC or 230VAC | | Voltage Regulation(Batt. Mode) | +10% ~ 18% | | Frequency | 50Hz or 60Hz | | Frequency Regulation (Batt. mode) | +/- 0.1 Hz | | Output Waveform (Batt. Mode) | Modified Sinewave | POWER FACTOR | P.F. | 0.6 | BATTERY | Charger Current | 10 Amp + / - 1Amp | 12Amp + / - 1Amp | | Floating Voltage | 13.7V + / - 0.2V | 13.7+ / - 0.2V 27.4V + / - 0.4V | | Overcharge Protection | 14.5V +/- 0.3V charger stops and fault | 29V +/- 0.6V charger stops and fault | TRANSFER TIME | Typical | 8ms | EFFICIENCY | AC to AC | >95% | | DC to AC | >80% | INDICATOR | AC Mode | Green LED lighting | | BatteryMode | Yellow LED lighting | | BatteryCharging Mode | Green LED flashing every 2 seconds | | Overload | Red LED flashing every 0.5 second | | Fault | Red LED lighting | AUDIBLE ALARM | Low Battery at Batt. Mode | Sounding every 2 seconds | | Overload | Sounding every 0.5 second | | Fault | Continously sounding | PROTECTION | Full Protection | Deep Discharge, Overcharge, and Overload protection | PHYSICAL | Dimension (DxWxH) mm | 224 X 255 X 80 | | Net Weight (kgs) | 1.7 for 500VA / 2.2 for 1000VA | ENVIRONMENT | Operating Environment | 0~40 Degrees Centigrade, 0~90% relative humidity (non-condensing) | | Noise Level | Less than 45dB | | | | | | | - - - -
Loading ..
