Precision tools & knives

We are leading manufacturers & exporters of industrial knives, like-hr cr slitting line toolings, work roll, imr, shot sleeves ptk has been engaged in the manufacture of various sizes of sleeves for aluminum die casting machines for various industries. slitting line toolings:- for all applications - hr & cr slitting.made out of d-2 (mv) grade and hds (modified). esr - forged grade raw-materials - depending upon coil specifications, whether ms or high tensile material and coil thickness . upto 5mm thick d2 (mv) grade for beyond 5mm hds (m) , esr forged blanks are used. in hr slittting cutters we are the pioneers and guarantee for total satisfaction, with zero chipping and long knife-life.work rolls - are made from aisi d2 (mv grade), hardened at very high temperatures and then tempered at very high temperature. due to this on one hand while the hardness of the rolls after 3 tempering is 63-64 rc, at the same time there is no formation of soft spots on the rolls, due to which the tool does not chip nor crack. on top of it this rolls give added life atleast up by 30-40%. down time and scrap generation is zero due to zero roll-failure. imr & drive & idler rolls - rolls are made out of best quality hot die steels made thru esr route & forged unlike other who make imr from rolled material cr slitting cutters - made only out of d2 (mv) grade steel. the knives in any thickness with 2 micron (+) or (-) accuracy and mirror finish give you a very clean cutting edge to make your line give the best results