We can send you complete Refrigeration and Ventilation machinery for CLEAN ROOM.Installation to be organised by you.
S.No. Material Description Make Quantity
1 Double skin Air Handling Unit with complete frame work in Aluminium,Three way corners with double skin panels with outer wall 0.6mm thick GI sheet insulated with 25 kg per sq m injected PUF and complete with extruded aluminium frame for motor and blower, pre filters, vee filters, frame.Blower capacity 2000 CFM. Air Static pressure 125mm of water column.Mixing chamber and accessories.Heat Exchanger 6 row deep with copper coils. Sigma 1
2 Centrifugal Blower NICOTRA/ebm Nadi 1
3 Blower Motor Kirloskar or GE 1
4 Condensing Unit 5 Tr Emerson 1
5 Expansion valve Danfoss, made in Denmark 1
6 Piping, Valves and fittings of forged type in copper and brass Mettube Malaysia 1 set
7 Refrigerant Gas R22 Mafron 6 kg
8 Filter Drier Danfoss 1
9 Terminal HEPA filters of filtration level 0.3 micron particle size and filtration efficiency of 99.97% complete with housing, gaskets, sealants, fittings etc
Thermodyne/equivalent core material
10 Volume Control Dampers: material aluminium in geared arrangement STD make 2
11 All ductwork fabricated out of 24 and 22 gauge GI sheets complete with supports, flanges, silicone sealant and as per BIS STD. Complete work.
STD make 1 lot
12 Metallized foil faced Nitrile Rubber insulation for duct work. Discharge ducting with 19mm and return air ducting with 13 mm thick rubber.
STD make 1 lot
13 Return air grills, dampers, filter arrangement for all return air risers STD make 1 lot
14 Magnehelic gauges with box and SS cover.
DWYER USA / Equivalent 2
15 Electrical Control Panel. Digital Temperature display. Fully electronic automation with digital temperature and Relative Humidity display. Sigma Design & fabrication 1 lot